bearing loss

英 [ˈbeərɪŋ lɒs] 美 [ˈberɪŋ lɔːs]

轴承损失

电力



双语例句

  1. The rapidly increased heat generation of high speed hybrid ball bearing draws a need of predicting skid and spin power loss of the bearing.
    高速工况下,轴承摩擦发热量剧增,因此预测球在内外圈滚道的滑动和自旋摩擦功率对高速球轴承的选用、分析和优化意义重大。
  2. The paper introduces the application of lubricating and sealing technology of rolling bearing, which can reduce the loss of bearing and the rate of accident in routine production.
    通过介绍滚动轴承润滑与密封技术的应用,使得减少日常生产中轴承的损耗,降低事故的发生率。
  3. The connecting wire is directly fixed on a surface of a bearing object, thereby reducing reflecting loss of incident sunlight, simplifying mounting process and reducing mounting case.
    再用套管连杆、人字支架和连接线将若干个单位电池板组合集成,并由连接线直接固定在承载物体表面。
  4. Game analysis based on bearing of project loss caused by lazy manager
    基于项目管理者偷懒情况的损失承担博弈模型研究
  5. Bearing housings shall be effectively sealed against loss of lubricant and ingress of fluid or dirt.
    轴承座应有效密封,以防止丢失的润滑剂和渗入液体或污物。
  6. In the second possible course of action, she can rid some burden from her conscience by bearing some personal loss and resigning from her job.
    而第二种情况,她个人承受了一定损失,良心上可以卸去一部分责任。
  7. LONG-LENGTH THERMAL-SEPARATOR DISTANCE PIECES-The extra length of these stainless steel separators prevents bearing freeze-ups; minimizes heat loss.
    加长型热分离器距离片&这些不锈钢分离器的额外长度防止轴承冷冻上升;使热耗减到最小。
  8. Bearing Power Loss Analysis under Different Lubricating States for Satellite Attitude Control Flywheel
    卫星姿态控制飞轮轴承不同润滑状态下功耗分析
  9. For solid rotor of radial magnetic bearing, besides the windage loss, the iron losses will be significant when the speed is high, and the eddy current loss will be dominant at high speed.
    电磁轴承支承的实心转子在高速旋转时,除由于空气摩擦产生损耗外,转子内还将产生相当大的铁损耗,而且主要是涡流损耗。
  10. With the dual status of being both peasants and soldiers, they live in a state of suspension and alienation, bearing the dual loss of value facing females and themselves.
    农民和士兵的双重身份使这些男人处在一种悬浮而异化的生存状态,承受着面对女人和面对自身的双重的价值失落。
  11. However, if they haven't do it, they would depend on the laws to establish the rules on passing of risk and bearing, in order to distribute the loss that risk caused as rational and fair as possible to both sides.
    但如果没有约定则需要通过法律来确立风险负担的规则,以便将风险造成的损失在双方得到尽可能合理与公平的分配。
  12. Based on the elasticity theory, the factors which affect the high speed rolling bearing ′ s work clearance in loss lube condition are analysed in this paper. The variations of high speed rolling bearing ′ s work clearance are studied and the concerned formulae are presented.
    以弹性理论为基础,分析了失去润滑情况下影响高速滚动轴承工作游隙的因素,研究了轴承工作游隙的变化并给出其计算公式。
  13. Disturbance of iron metabolism and sudden bearing loss: a prospective and retrospective survey
    突发性聋与铁代谢障碍疾病关系的临床调查
  14. Influence of Structure parameters of High-speed Hydrostatic pressure Bearing on Loss of Frictional Power
    高速液体静压轴承结构参数对摩擦功率损失的影响
  15. Water stress in shooting and bearing period had the largest yield loss, following with the tillering stage and heading stage.
    拔节孕穗期遭受水分胁迫在单阶段胁迫中减产幅度最大,分蘖期、抽穗开花期紧随其后,分蘖、拔节孕穗期连续中度胁迫减产幅度超过任一时期。
  16. A systematic description is given of the current research in the vibration problem, ultimate bearing capacity, anchorage system and prestress loss calculation regarding the external prestressed concrete beam in China, as a reference for the design and research later on.
    比较系统全面地阐述了国内外在体外预应力混凝土梁的动力问题、极限承载力及锚具系统和预应力损失计算等方面的研究现状,为今后的设计和研究提供了参考。
  17. The paper presents the effect of internal and external leakage from a bearing seal in a slush pump on the loss of power in processing procedure of alumina and cement.
    本文概述了泥浆泵轴封的内泄和外漏对氧化铝和水泥等生产工艺能耗的影响;
  18. The Application of Function of Quality Loss in the Evaluation of Bearing Quality Loss
    质量损失函数在轴承质量损失评定中的应用
  19. It was found that the developed roll bearing had little lubricant evaporation loss and wear debris generation as well, and it could find promising application in extremely clean environment.
    结果表明,所研制的滚动轴承的润滑剂散失和磨损微粒排放小,适用于高度洁净的特殊环境,应用前景广阔。
  20. According to simulation on the performance of the porting pair hydrostatic bearing, the power loss and water film thickness of it are discussed on the aspects of working pressure, water temperature and parameters of the hydrostatic bearing structure of pump.
    论文通过配流副静压支承性能的仿真,从泵的工作压力、水温和静压支承结构参数三个方面,对配流副的水膜厚度和功率损失率进行了讨论。
  21. Calculation of and experimental study on inclinable bush bearing loss for 600 MW turbine power generator
    600MW汽轮发电机可倾瓦轴承损耗计算与试验研究
  22. Discussion on Rolling Bearing Fit Selection from Burning Loss of Rolling Bearings
    从滚动轴承的烧损看其配合的选择
  23. Studying the guide bearing lubrication and seal performance of the large water pump is significant to decreasing bearing friction loss, lowering failure rate, improving the reliability, saving the maintenance and overhaul cost of pump station.
    研究水泵导轴承的润滑与密封特性,对减小轴承摩擦损耗,降低故障率,提高可靠性,节省泵站维护检修费用有重要意义。
  24. Through the simulation experiment of real thrust bearing, frictional power loss first increases and then decreased when the radius of the thrust bearing increases, and it increases when load or speed increases, and it is proportional to both of them.
    对模拟真机实验结果的分析表明,摩擦功耗随止推面半径的增大先增大后减少;随着载荷和转速的增大而增大并都成正比关系。
  25. The city is not only the center of the national economy, culture, politics, science and technology, but also the bearing of natural and man-made calamity, once suffered the loss is tremendous.
    城市是国家经济、文化、政治、科技信息的中心,同时也是人为灾害和自然灾害的巨大承灾体,一旦遭受灾害影响其损失也是巨大的。
  26. The friction heat of bearing and the electromagnetic loss heat of built-in motor will cause thermal deformation of spindle, which will reduce the machining accuracy of machine tool and affect the speed improvement of high-speed motorized spindle.
    轴承的摩擦发热和内置电机的电磁损耗发热会引起主轴的热变形,从而会降低机床的加工精度,也会影响高速电主轴转速的提高。
  27. The related experiment equipments are purchased and the experiments are carried out for the two samples, two groups of test data are analyzed and the experimental values of additive loss in rotor bearing and mechanical loss are acquired.
    购置了相关实验设备并分别对两台样机进行了实验,分析两组实验数据,得到了扶正轴承附加涡流损耗和机械损耗的实验值。
  28. It was proved that magnetic bearing with constant-current source has less power loss than conventional active magnetic bearings.
    证明了恒流源偏置磁悬浮轴承在稳定悬浮时比传统主动磁悬浮轴承的功率损耗小。
  29. However, the end bearing and shaft resistance loss a lot, because of the inherent defect of piles cast in place ( mud in the end and side of piles). All of these will arouse adverse impact on the control of settlement.
    但是由于钻孔灌注桩存在固有缺陷(桩底沉渣和桩侧泥膜),导致桩端阻力和桩侧摩阻力显著降低,对沉降控制造成不利的影响。
  30. At the same time, sale will create 2 different types of title: legal and equitable. This distinction is important in risks bearing of loss in the period of contract and in property transferring if one party dies.
    同时买卖还会产生普通法所有权和衡平法所有权的区分,这个区分在买卖合同期间的标的物意外灭失的风险负担及当事人一方死亡时的财产移转规则中具有重要意义。